Bunk Bed plans with stairs – A bunk bed allows two children to sleep in a room comfortable, although the room is small. A bunk bed should also stairs for the children to safely climb in and out of the top bunk. This is especially important if the top bunk is too high for the highest child to climb into. If your bunk bed does not have a set of stairs, you do not have to go to the Furniture to buy it, you can build it yourself using materials and tools from a hardware store.
The instructions is Measure from the floor to the top of the upper bunk’s base. Post measurement. Cut the two pieces of wood that will serve as the sides of the stairs by measuring you registered. Cutting 45-degree angles on both ends of each piece of wood. This is necessary so that each side will lay squarely on the floor and the side of the top bunk. Cut the last piece of wood in 12-inch lengths. These will serve as steps for the stairs. Sanding the edges of each piece of wood bunk bed plans with stairs to smooth out any roughness. Lay two sides of the stairs on the ground, and then measure and mark the one-foot intervals along each side.
12 Photos Gallery of: Make a Bunk Bed Plans with Stairs
Set the stage to the pages of the selected intervals with nails. Get set of stairs up and lean it against the side of the top bunk. The stairs must be raised by 45 degree angle on facing the top bunk and the floor. Connect the stairs to the bunk bed. Drill holes through the top of each side of the stairs and into the bunk bed plans with stairs. Place the bolts in each hole and secure them to observe the stairs in place.