Winding staircase is good for houses where you need a way to go from the first to the second level in a limited space. Some people also just like how spiral stairs look in a home. They are aesthetically appealing and often develop a sense of nostalgia.
13 Photos Gallery of: Building Winding Staircase
Check building standards in your area before doing any work. If you buy a kit, many companies will not send the rate until they see a signature from a building inspector. Start the winding staircase from a ceiling or floor opening for an easier start. The stairway to a wall can make it difficult to get the turn and the height of the roof. Set the stairs so that you have enough ceiling height. The free height of the best stairs should be 6 feet 6 inches.
Winding staircase to measure the height and diameter. The diameter should also contain a space of at least 2 inches from the walls and floors of the railing. Calculate your pattern height. The width is determined because this is on the outside of the stairs, not the inside. Select the forest for the staircase. Cut all stair steps at once and cut them only 4 inches wide. Somewhat wider and they will crawl and be useless. You will use several pieces of wood to make a single ladder. Alternate wood grain when joining the pieces. Glue the pieces together after grinding cut marks. Cut the inner part of the staircase with a band saw to get the round center.
This will keep it from touching side to side. The weight of the staircase will be on this pole so it must be able to withstand the pressure. The rod will be the same length as the floor to floor altitude measurement for the stairs. Weld the upper and lower steps to the middle pole. Install the rest of the staircase; attach them to the center pole. Fit the rack. Since this is the hardest part of making the spiral staircase, buying a made especially for a spiral staircase is the best idea.